poniedziałek, 28 stycznia 2013

Geode is up and running

So I have managed to run the Geode setup. Instead of an hard drive I have utilized a Disk on Module SSD. You might note that there is a second floppy disc drive connected. This is due to the first ones malfunction. I hope a good isopropanol cleaning will be enough for it to run one more.


On that I have installed MS-DOS 6.22 together with Norton Commander and a Borland Turbo C Proffesional bundle. In the bundle there is Turbo C, Turbo Debugger and Turbo Profiler. The first two will be used to work with the Car PC.

Brak komentarzy:

Prześlij komentarz